Publicité
Les langues disponibles
Les langues disponibles
Option Buttons
Your washer features several additional cycle options
that customize cycles to meet your individual needs.
To use these options, select the desired option after
selecting the desired cycle.
After selecting the desired cycle and settings, press
the cycle option button(s) for the option(s) you would
like to add. The button will light when that option is
selected. If the selected option is not allowed for the
selected cycle, the chime will sound twice to alert you
and the LED will not illuminate.
NOTE
• To protect your garments, not every feature is
available with every cycle.
• If the Start/Pause button is not pressed within 60
minutes to start the cycle, the control will shut off
and all settings will be lost.
Steam
Adding the Steam option to a wash cycle helps
provide superior cleaning performance. By using hot
steam, the fabrics will get the cleaning benefits of a
very hot wash.
NOTE
• The Steam option cannot be used with all cycles.
• Steam may not be clearly visible during the steam
cycles. This is normal. Too much steam could
damage clothing.
• Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.
WARNING
• Do not touch the door during steam cycles. The
door surface can become very hot. Allow the
door lock to release before opening the door.
• Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle. Steam can cause severe burns.
Fresh Care
Use this function when you won't be able to unload
your clothes immediately after the wash cycle ends.
After the cycle ends, the drum will tumble periodically
for up to 19 hours to prevent wrinkles.
1
Press and hold the Fresh Care button for 3
seconds.
2
Press the Start/Pause or Power button at any
time to unload laundry.
Pre Wash
A 15-minute prewash for clothes that are covered in
dirt or dust. This feature is suitable for heavily soiled
items.
Delay Wash
Once you have selected the cycle and other settings,
press this button to delay the start of the wash cycle.
Each press of the button increases the delay time by
1 hour, for up to 19 hours. Once the desired delay
time is set, press the Start/Pause button to start the
delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer will automatically shut off
after 60 minutes and all cycle settings will be lost.
OPERATION
29
Publicité
