Télécharger Imprimer la page

Garland SIOUX 1055 ZSG Manuel D'instructions page 42

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 62
English
6. START UP INSTRUCTIONS
6.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you will
find inside the box:
• Machine.
• Upper handle.
• Lower handle.
• Collection bag.
• Lateral output deflector.
• Mulching cap.
• Screw, washer and wing nut
of the upper handlebar (2).
• Lower handlebar wing nuts and washers (2).
• Lower handlebar bolts (4).
• Cable engagement circlip.
• Instruction manual.
Carefully remove all items from the box and make
sure that all listed items are present. Carefully inspect
the product to ensure that there are no damaged
elements.
If you find any damaged or missing parts, do not use
the machine until the defect has been repaired or
all the missing pieces replaced. Using the machine
without all of its parts or with defective parts can
cause severe personal injury.
6.2. ASSEMBLY
6.2.1. HANDLEBAR ASSEMBLY
Place the lower handlebar in the position that best
suits your work (H) or (L) and insert the screws. Then
place the corresponding washers and wing nuts and
tighten them well.
Place the upper handlebar on the lower handlebar and
once you have inserted the screws, place the washers
on the other side and tighten the wing nuts.
6.2.2. BRAKE AND CLUTCH CABLE ASSEMBLY
Insert the brake cable and clutch cable into the hole
of the appropriate lever, see the illustration below. The
arrow indicates where the cable should pass.
42/172

Publicité

loading

Ce manuel est également adapté pour:

Sioux 1055 zesgSioux 1055 zsg-v23Sioux 1055 zesg-v23