Publicité
Les langues disponibles
Les langues disponibles
Recommended Measures to Secure
the TV
Consider the following measures when
securing your TV to a Stand (not supplied).
1
Secure the Stand for the TV.
Make sure the Stand can adequately
support the weight of the TV. Use
two angle braces (not supplied) to
secure the Stand.
For each angle brace use the
appropriate hardware to:
Attach one side of the angle brace to
the wall stud.
Attach the other side to the Stand.
2
Secure the TV to the Stand.
Use the optional hardware listed as
follows (not supplied):
M4 machine screws (screwed into the
TV's rear cover).
A screw or similar (attach it to the
Stand).
Rope or chain (strong enough to
support the weight of the TV). Make
sure that there is no excess slack in the
rope or chain.
8
US
Angle braces
(not supplied)
Stand
Screw hole
on the rear
cover
Rope or
chain
(not
supplied) Screw
The length of the M4 machine screw
differs depending on the rope or chain
diameter. Please refer to below
illustration.
8 mm - 12 mm
TV's rear cover
3
Anchor the TV to the wall by using
bolts, wall anchor and chain (or
rope).
M4 machine
screw
(not supplied)
(not supplied)
Screw M4
Rope or chain
Publicité
