Sony BRAVIA KD-70X690E Manuel D'instructions page 10

Parts and Controls
TV
  (Power) / + / –
Short press  to turn the TV on.
Long press  until the TV turn off.
When the TV is on,
Volume
Press + or – button to increase/decrease
the volume.
You can also press  until
notification is displayed. Increases/
decreases the volume by pressing the +
or – button.
Input
Press  until
displayed.
Moves the selected input source by
pressing + (up) or – (down) button.
Channel
Press  until CH notification is
displayed.
Select the channel by pressing + (up) or
– (down) button.
10
US
notification is
 (Sensors/LED indicator)
• Receives signals from the remote
control.
Do not put anything over the sensor.
Doing so may affect its function.
• Lights up in amber when the [Sleep
Timer] or [On Timer] is set (page 30),
or the TV is in Photo Frame Mode
(page 20).
• Lights up in green when [Power
Saving] is set to [Picture Off]
(page 32).
• Lights up in green when the TV is
turned on.
• Does not light up when the TV is in
standby mode.
• Flashes while the remote control is
being operated.
Note Note
• Make sure that the TV is completely turned off
before unplugging the AC power cord.
• To disconnect the TV from the AC power
completely, pull the plug from the mains socket.
• Please wait for a while when perform input
selection to change to other input.