Sony BRAVIA KD-70X690E Manuel D'instructions page 28

Setup
Network
Network Setup: Sets the network
status settings.
IPv6/IPv4 Priority: Switch between
[IPv6] and [IPv4 (Recommended)].
Note
• To use the network with [IPv6], select
[IPv6], then select [Easy] in [Set up
network connection].
• When IPv6 is selected, HTTP Proxy
cannot be set.
• When IPv6 is selected, some Internet
browser sites, applications or contents
cannot be watched.
Built-in Wi-Fi: Turns the built-in Wi-
Fi [On] or [Off].
Set to [Off], if you do not use the
built-in Wi-Fi.
When you switch from [Off] to
[On], establish the network
connection via [Network Setup].
Wi-Fi Direct: Turns on/off to
connect your TV with Wi-Fi Direct
device such as PC, mobile phone
or digital camera.
Wi-Fi Direct Settings: Set to
connect a Wi-Fi direct device to
the TV using the Wi-Fi Direct
function. If you cannot connect,
press OPTIONS key and select
[Manual].
Device Name: Change the name of
the TV shown on the connected
device.
Refresh Internet Content: Connect
to the internet to receive available
Internet content services.
Samba Interactive TV: Select
[Enable] to activate this feature.
Connect your devices to Samba
Interactive TV by downloading
apps that work with your TV.
Note
• Network feature is subject to change
without notice.
28
US
Home Network Setup:
Show/Hide Media Servers
Displays the connected server list.
You can select the server to display
in the Device Selection.
Media Server Troubleshooting
Diagnoses whether the TV can
connect to each server on the home
network.
Remote Start
This feature allow connected device
in the home network to turn on the
TV.
Note
• The standby power consumption will
increase if [On] is set.
Renderer
Renderer
Enables the TV to play media files
on a device (e.g. digital still
camera).
Renderer Access Control
Allows access from a specified
control device.
Renderer Options
Adjusts the [Renderer Options]
detailed settings.
Privacy Policy
Select [Agree] or [Disagree] for Privacy
Policy confirmation. (page 16)
Photo Frame Settings
Display Mode: Allows you to select
the display mode. Select from
[Image and Clock], [Full Screen
Image] and [Full Screen Clock].
Clock Display: Allows you to select
the clock display.
Note
• This option is available when [Display
Mode] is set to [Image and Clock] or
[Full Screen Clock].
Audio Application: Sets [Music] or
[Off] as audio application.
Image Selection: Select image.
Music Selection: Select music.
Slideshow Setting: Select from
showing slideshow mode or
single view photo.