Sony BRAVIA KD-70X690E Manuel D'instructions page 14

Connecting TV to the Internet
Setting up the Internet
Connection
To use the network features of your TV it
needs to be connected to the Internet. The
set-up procedure differs depending on the
type of network and LAN router. Before
setting up the Internet connection, be sure
to set up a LAN router. Check your wireless
LAN environment using the following chart.
Wireless LAN
Secure Wireless LAN?
YES 
Do you use a wireless LAN
router compatible with Wi-Fi
Protected Setup™ (WPS)?
YES 
Type 1*
Wired LAN  Type 4
* Type 1 is easier to set up if your router has an
automatic setting button, e.g. Air Station One-
Touch Secure System (AOSS). Most of the
latest routers have this function. Check your
router.
Type 1: Follow the configuration for
Secured network with Wi-Fi
Protected Setup™ (WPS).
Type 2: Follow the configuration for
Secured network without Wi-Fi
Protected Setup™ (WPS).
Type 3: Follow the configuration for
Unsecured network with any
type of wireless LAN router.
Type 4: Follow the configuration for Wired
network set-up.
14
US
Type 1: Secured network with Wi-Fi
Protected Setup™ (WPS)
The WPS standard makes security of a
wireless home network as straightforward
as pressing the WPS button on the wireless
LAN router. Before setting up a wireless
LAN, check the location of the WPS button
on the router and verify how to use it.
For security purpose, [WPS (PIN)] provides a
PIN code for your router. PIN code is
renewed every time you select [WPS (PIN)].
1
2
NO
 Type 3
NO
 Type 2
3
4
Note Note
• If you use WPS for network set-up, the security
settings of the wireless LAN router activate, and
any equipment previously connected to the
wireless LAN in a non-secure status will be
disconnected from the network.
In this case, activate the security settings of the
disconnected equipment and then reconnect.
Or, you can deactivate the security settings of
the wireless LAN router, and then connect the
equipment to a TV in a non-secure status.
• To use the network with IPv6, select [Settings]
 [Preferences]  [Setup]  [Network] 
[IPv6/IPv4 Priority]  [IPv6], then select [Easy]
in [Set up network connection].
• When IPv6 is selected, HTTP Proxy cannot be
set.
Press HOME, then select [Settings]
 [Preferences]  [Setup] 
[Network]  [Network Setup].
IP Address setting/Proxy server:
– automatic setting:
[Set up network connection]  [Easy]
– manual setting:
[Set up network connection]  [Expert]
 [Wired Set-up] or [Wireless Set-up]
Select [WPS (Push Button)] for Push
Button method or [WPS (PIN)] for
PIN method.
Note
Button name of the WPS may differ
depending on the router (e.g. AOSS button).
Follow the instructions on the set-up
screen.