Polar Refrigeration GG216 Notice D'utilisation page 5

Cleaning, Care and Maintenance
Switch off and disconnect from the power supply before cleaning
The doors can be removed for ease of cleaning
Clean the interior of the appliance as often as possible
Do not use abrasive cleaning agents. These can leave harmful residues
Clean the door seals with water only
Always wipe dry after cleaning
Replacing the Interior Lamp
Call your POLAR dealer or a qualified electrician, the Lamp Assembly is available to purchase as a spare
part.
Cleaning the Condenser
Periodic cleaning of the Condenser can extend the life of the appliance, POLAR recommend that a
POLAR agent or qualified technician clean the condenser
Trouble Shooting
Fault
The appliance is not
working
The appliance is not
cooling
The Light does not
work
If the machine malfunctions due to causes other than those listed or the proposed corrective actions
do not solve the problem please call a Polar agent or qualified technician
Probable Cause
The appliance is not switched
on
Plug and Lead are damaged
Fuse in the plug has blown
Power Supply
Internal Wiring Fault
Coolant Leak
Fan Motor Failed
Airflow to the condenser
obstructed
Condenser is clogged
Bulb has blown
Bulb Starter has blown
.
Action
Check the appliance is plugged in correctly
and switched ON
Call POLAR agent or qualified technician
Replace the plug fuse
Check power supply
Call POLAR agent or qualified technician
Call POLAR agent or qualified technician
Call POLAR agent or qualified technician
Increase the gap between appliance and
obstacles/heat source
Call POLAR agent or qualified technician
Replace Bulb with identical type
Replace Starter with identical type
UK