Vivobike E-2500 RM Mode D'emploi Et D'entretien page 4

• Wheels run true and hub bearings are correctly adjusted
• Wheels are properly secured and locked to frame/fork
• Tyres are in good condition and inflated to correct pressure
• Pedals are securely tightened to pedal cranks
• Gears are correctly adjusted
• All reflectors are in position.
WARNING WHEELS: Every six months, your pedal electric assistance bicycle should be
professionally checked to ensure that it is in correct and safe working order. It is the
responsibility of the rider to ensure all parts are in working order prior to riding. It is very
important to check the rim wear monthly and monitor the rim wear line, if this groove
becomes invisible the rim is past its safe working life. A severely worn rim is very dangerous
and must be replaced.
REGULAR ATTENTION MUST BE PAID TO THE HUB MOTOR SPOKE TENSION.
Warning: You are warned that you assume the risk for personal injury, damage
or losses if you breach the above conditions and, the warranty will be void
automatically.
Ⅱ. Name of pedal electric assistance bicycle components
(Fig. 1)
E-2500 RM
4/44