Vivobike E-2500 RM Mode D'emploi Et D'entretien page 8

* Press the key and turn it anticlockwise from 6 o'clock to 12 o'clock position. (refer Fig. 4.2)
* Remember to take off and care about the key after you withdraw the battery from the carrier!!!
5. LED and Function:
5.1 6Km/h button with a red circle, see (Fig. 6):
The bike can be power-assistance at the speed
of 6 km/h when you keep pressing this button.
After the motor starts working and the bike
running, you could easily pedal and release the button.
5.2 Power display on handlebar panel:
Under normal state, turn on the power supply, the four LED lights will be displayed from low to high power
levels. When all LED lights are bright, this condition indicates that the electricity is full. If the last light has
been flashing, this is a warning, should be charged immediately before riding the battery.
4 LED light on: power is 100%
3 LED light on: power is 70%
2 LED light on: power is 50%
1 LED light on: power is 25%
1 LED light is on and flashing: power will be empty, the battery need to be charged immediately.
5.3 Select assistance level on handlebar panel:
When the power is on, you can shift to 3 assistance levels, low middle and high. Press the button "+" and
"-", to shift the assistance level (Low middle and high). Here is the way how to set the assistance level:
When the power is on, the "middle" LED is on which means the power-assistance is in the 2
you can press the "+" and "-" buttons to choose the Low, Middle and High.
When selecting the high assistance level, meaning more electric power and less human propulsion are
applied to the bike. This level is suitable for uphill, head wind or heavy load riding.
When shifting to middle assistance level, it means electric and human propulsion almost fifty/fifty applied
to this bike. We suggest you select this assistance level, when riding on regular flat paved road.
(Fig. 4.3)
(Fig. 5)
nd
grade. Then
8/44