Publicité
Les langues disponibles
Les langues disponibles
8
. Remove all tape and door
bracing from refrigerator and freezer
doors. Remove screws attaching
handles to door frames. Slide
decorative door panels into door
frames.
If panels are less than l/4" (6 mm)
thick, install a filler panel between
door and decorative panel.
If panels are more than l/4"
(6 mm)
thick, route panel edges on all sides.
I3
. Remove top grille assembly
from carton. Slide decorative panel up
and off mounting
assembly. Remove
two plastic nuts to release tethers from
mounting
panel assembly. Carefully
set decorative panel aside.
14
. Attach brace to too riaht
front corner of refrigerator cabynet
with one screw. Insert mounting
panel flange into cabinet trim channel
and center over top and side trim.
Attach mounting
panel assembly to
brace with one screw.
Page 9
Publicité
