Panasonic WV-CS574 Mode D'emploi page 36

• When 5 privacy zones or more are framed on the
displayed screen in the same time, the whole screen
will be masked. In this case, diminish the number of
the zones and set the privacy zones larger.
• The privacy zone may appear on the monitor screen
depending on the direction of the camera.
• The privacy zone function will not work at start-up
immediately after turning the power on.
3. To register a new zone
3-1 For PAN/TILT, move the cursor to PUSH SET and
press the CAM (SET) button.
** ZONE NUMBER 3*/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
3-2 Adjust the pan and tilt position so that the
desired position comes into the zone frame with
the joystick.
** ZONE NUMBER 3*/8 **
PAN/TILT
ZOOM/FOCUS
U TILT D/L PAN R
ZONE SCALE
SET DEL
RET
3-3 For ZOOM/FOCUS, move the cursor to PUSH
SET , and press the CAM (SET) button.
** ZONE NUMBER 3*/8 **
PAN/TILT
ZOOM/FOCUS
U ZOOM D/L FOCUS R
ZONE SCALE
SET DEL
RET
3-4 Adjust zoom and focus, and press the CAM
(SET) button.
Zoom can be adjusted within the range of 1 to 10
magnifications.
3-5 Move the cursor to ZONE SCALE, and move the
joystick to the right or left to adjust the zone
frame. Press the CAM (SET) button after the
adjustment.
→PUSH SET
→PUSH SET
••••|••••
L H
→PUSH SET
→PUSH SET
••••|••••
L H
→PUSH SET
→PUSH SET
••••|••••
L H
** ZONE NUMBER 3*/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
Moving the joystick in the L direction decreases
the zone frame, and moving it in the H direction
increases it. However, the aspect ratio is fixed at
3 to 4.
The privacy zone setting has been completed.
The menu returns to the ZONE NUMBER setting
menu.
3-6
• To complete new settings and repeat other set-
tings, move the cursor to SET and press the
CAM (SET) button. The ZONE NUMBER setting
menu reappears.
• To cancel new settings and return to the SPE-
CIAL 1 menu, move the cursor to DEL and press
the CAM (SET) button. New settings are not reg-
istered.
• To complete new settings and return to the SPE-
CIAL 1 menu, move the cursor to RET and press
the CAM (SET) button.
G Proportional Pan/Tilt (PROPO. P/T)
Move the cursor to PROPO. P/T and select either ON or
OFF with the joystick.
Factory default setting: ON
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
ON: Pan/tilt speed is in inverse proportion to the
zoom ratio as follows:
Zoom ratio
x1
x2
x4
x8
x15 or more
* The speed level values are approximate.
OFF: The speed is constant at the fastest level
regardless of the zoom ratio.
-36-
→PUSH SET
→PUSH SET
••••|••••
L H
** SPECIAL 1 **
OFF
ON
ON(USER)
STOP
OFF
ON
OFF
OFF
0°
Speed level
7 (fastest)
5
3
1
0 (slowest)