Publicité
Les langues disponibles
Les langues disponibles
I Auto Mode Selection (AUTO
MODE)
1. To set auto mode
Move the cursor to AUTO MODE and select a mode
with the joystick. Modes change as follows:
** SET UP MENU **
PRESET 1
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTO PAN KEY
DIGITAL FLIP
SPECIAL1
CAMERA
RS485 SET UP
PASSWORD LOCK OFF
2. When AUTO PAN is selected, set details as follows:
OFF
SEQ
SORT
Move the cursor to AUTO PAN O and press the
CAM (SET) button to display the AUTO PAN setting
menu.
3. To set a panning starting point and panning end-
point
Follow the steps below.
(1) Move the cursor to POSITION and press the
CAM (SET) button. The cursor moves to START.
** AUTO PAN **
POSITION
SPEED
ENDLESS
DWELL TIME
PAN LIMIT
ZOOM LIMIT
RET
** AUTO PAN **
POSITION
SPEED
ENDLESS
DWELL TIME
PAN LIMIT
ZOOM LIMIT
RET
(2) Move the joystick to select a panning starting
point and press the CAM (SET) button.
OFF
OFF
AUTO PAN
AUTO PAN
ON
AUTO PAN
PATROL
START
END
••••|••••
L
H
OFF
1S
OFF
OFF
START
END
••••|••••
L
H
OFF
1S
OFF
OFF
This determines the starting point and the cursor
moves to END.
POSITION
SPEED
ENDLESS
DWELL TIME
PAN LIMIT
ZOOM LIMIT
RET
(3) Move the joystick to select a panning endpoint
and press the CAM (SET) button.
This determines the endpoint and the cursor
moves to POSITION.
4. To set a panning speed
Move the cursor to SPEED, and set a panning
speed with the joystick.
POSITION
SPEED
ENDLESS
DWELL TIME
PAN LIMIT
ZOOM LIMIT
RET
The panning speed increases when the joystick is
moved to the right, and decreases when it is moved
to the left.
Caution:
If the panning range is changed after the camera
has not panned for a long time or has been panning
in the same panning range, the picture may not be
clear or noise may appear. In such cases, pan the
camera fully several times.
If this does not eliminate the problem, refer servicing
to qualified service personnel.
5. To set ENDLESS to ON/OFF
Move the cursor to ENDLESS, and select ON or OFF
with the joystick.
POSITION
SPEED
ENDLESS
DWELL TIME
PAN LIMIT
ZOOM LIMIT
RET
ON: The camera pans from the starting point to the
endpoint, and keeps rotating in the same direc-
tion to return to the starting point. Set PAN LIMIT
to OFF before ENDLESS is set to ON.
-32-
** AUTO PAN **
START
END
••••|••••
L
H
OFF
1S
OFF
OFF
** AUTO PAN **
START
END
••••|••••
L
H
OFF
1S
OFF
OFF
** AUTO PAN **
START
END
••••|••••
L
H
ON
1S
OFF
OFF
Publicité
