Publicité
Les langues disponibles
Les langues disponibles
Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Power, kW/hp @ rpm
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Fuel tank capacity, US pint/litre
Oil pump capacity at 9,000 rpm, ml/min
Oil tank capacity, US pint/litre
Type of oil pump
Weight
Chain saw without bar or chain, empty tanks, lb/kg
Chain/bar
Standard bar length, inch/cm
Recommended bar lengths, inch/cm
Usable cutting length, inches/cm
Pitch, inch/mm
Thickness of drive links, inch/mm
Drive sprocket type/teeth
Chain speed at max. power, m/sec
NOTE! This spark ignition system complies with the Canadian standard ICES-002.
Recommended cutting equipment for Canada
The following is a list of recommended cutting equipment for Jonsered chain saw models CS 2152, CS 2152W, CS
2152WH, CS 2152C, CS 2153, CS 2153C, CS 2153WH and CS 2153CWH. The combinations of powerhead, bar and
chain meet all requirements outlined in the CSA Z62.1 Chainsaws and Z62.3 Chainsaw Kickback standards.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent
or less kickback energy than the sprocket-nose bar.
We recommend that you as replacement use the listed bars and chains or "Type C Low-Kickback Saw Chains" which
are available at your dealer.
TECHNICAL DATA
3
CS 2152
3,15/51,7
1,77/45
1,28/32,5
2700
2,4/3,3 @ 9000
NGK BPMR 7A/
Champion RCJ 7Y
0,02/0,5
1,06/0,5
5-12
0,59/0,28
Automatic
5,0: CS 2152, CS 2152 C
5,1:CS 2152 W,
CS 2152 WH, CS 2152 CWH
13"/33
13-20"/33-50
12-19"/31-49
0,325"/8,25
0,050"/1,3
0,058/1,5
Rim/7
17,3
CS 2153
3,06/50,1
1,74/44,1
1,28/32,5
2700
2,6/3,5 @ 9600
NGK BPMR 7A/
Champion RCJ 7Y
0,02/0,5
1,06/0,5
5-12
0,59/0,28
Automatic
11,2/5,1: CS 2153,
CS 2153 C
11,5/5,2: CS 2153 WH,
CS 2153 CWH
13"/33
13-20"/33-50
12-19"/31-49
0,325"/8,25
0,050"/1,3
0,058/1,5
Rim/7
18,5
English – 39
Publicité
