Garland APACHE 1275 ZSL Manuel D'instructions page 43

6. START UP INSTRUCTIONS
6.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you
will find inside the box:
• Machine.
• Upper handle.
• Lower handle.
• Bag.
• Mulching cap.
• Lateral output deflector.
• Upper handle screw and wing nut (2).
• Lower handle screws (2).
• Lower handle wing nuts (2).
• Cable engagement circlip.
• Instruction manual.
Carefully remove all items from the box and make
sure that all listed items are present. Carefully inspect
the product to ensure that there are no damaged
elements.
If you find any damaged or missing parts, do not use
the machine until the defect has been repaired or
all the missing pieces replaced. Using the machine
without all of its parts or with defective parts can
cause severe personal injury.
6.2. ASSEMBLY
6.2.1. ASSEMBLING THE HANDLEBAR
Place the lower handlebar and once the screws have
been inserted tighten the wing nuts.
Place the upper handlebar on the lower handlebar to
the most comfortable working position (2 positions)
and, after inserting the screws, tighten the wing nuts.
When you finish mounting the upper handlebar adjust
the lower handlebar to the most comfortable working
position (2 positions).
Place the cable engagement circlip.
43/184
English