RISCO Group WatchIN RK325DT Guide D'installation page 19

Quick Keys Parameter
possibility that the intruder will "Learn" the detector behavior.
[2][0][3][zzz] 3 LEDS
[1][3]
All 3 LEDs will operate.
[2][0][3][zzz] Detection Sensitivity
[2]
Defines the sensitivity of the detector(MW + PIR)
[2][0][3][zzz] Sensitivity Options
[2][1]..[4]
1) Low
2) Medium
[2][0][3][zzz] MW Range
[3]
Defines the microwave channel range (maximum range - 27m)
[2][0][3][zzz] MW Range options
[3][1]..[7]
1) Minimum
2) 20%
[2][0][3][zzz] Alarm Logic
[4]
Determine the detector's logic of defining an alarm.
[2][0][3][zzz] PIR and Microwave
[4][1]
Alarm is activated when both PIR and MW channels detect an alarm
(AND Logic)
[2][0][3][zzz] PIR or Microwave
[4][2]
An alarm is activated when either PIR or MW channels detect an alarm (OR
Logic)
[2][0][3][zzz] Lens Type
[5]
Defines the actual Lens of the detector
[2][0][3][zzz] Lens Type Options
[5][1]..[2]
1) Wide Angle 2) Barrier
[2][0][3][zzz] Anti-Mask
[6]
Defines the operation of Anti Masking detection
[2][0][3][zzz] Anti-Mask Options
[6][1]..[2]
1) Disable 2) Enable (Default)
Quick Keys Parameter
[2][0][3][zzz] Arm/Disarm
[7]
Defines the operation of the LEDs and the anti masking detections while the
detector is armed
[2][0][3][zzz] No
[7][1]
AM (Anti masking) is enabled
LEDs behave according to the LEDs parameter definition
[2][0][3][zzz] Yes
[7][2]
AM (anti masking) is disabled
LEDs are disabled
[2][0][3][zzz] Green line
[9]
The WatchIN includes a Green Line feature that follows environmental
guidelines by avoiding surplus emission.
[2][0][3][zzz] NO
[9][1]
Green Line feature in disabled: MW is constantly activated
[2][0][3][zzz] Yes
[9][2]
Green Line feature is enabled
[2][0][3][zzz] SWAY
[0]
This option allows the recognition and immunity of swaing objects in a known
patern.
3) Normal
4) ACT (Anti-Cloak™ Technology)
3) 40% 5) 80%
4) 60% 6) Maximum
WatchIN Installation Manual
Default
Normal
Trimmer
7) Trimmer (MW is defined
by the trimmer setting on
the PCB)
PIR and Microwave
Wide Angle
Enable
Default
No
19