Cramer 82TX10 Mode D'emploi page 6

where the cutting plane is not parallel to the
ground surface
Service
• Servicing requires extreme care and knowledge and should be performed
only by a qualified service technician. For service we suggest you return the
product to your nearest AUTHORISED SERVICE CENTRE for repair. When
servicing, use only identical replacement parts.
The operation of any power tool can result in foreign objects being
thrown into your eyes, which can result in severe eye damage.
Before beginning power tool operation, always wear safety
goggles, safety glasses with side shields, or a full face shield when
needed. We recommend Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use
eye protection which is marked to comply with EN 166.
SAVE THESE INSTRUCTIONS. REFER TO THEM FREQUENTLY AND USE THEM
TO INSTRUCT OTHERS WHO MAY USE THIS UNIT. IF YOU LOAN SOMEONE
THIS UNIT, LOAN THEM THESE INSTRUCTIONS ALSO.
Disposal
Do not dispose of the power tool
with other household waste.
Dispose of power tool in return and
collection systems designated for
environmental safe recycling.
Separate collection of used
products and packaging allows
materials to be recycled and used
again. Re-use of recycled materials
helps prevent environmental
pollution and reduces the demand
for raw materials.
Batteries
At the end of their useful life,
discard batteries with due
Li-ion
care for our environment. The
battery contains material which
is hazardous to you and the
environment. It must be removed
and disposed of separately at a
facility that accepts lithium-ion
batteries.
EN GB
5
cramer.eu