Télécharger Imprimer la page

Dirt Devil UD70187 Manuel D'instructions page 2

Publicité

Les langues disponibles

Les langues disponibles

ASSEMBLY
Assembly Video
1
To attach body to base, align square opening on
base to circular opening on frame. From the top of
the body, press firmly straight down until the front
tabs click into place.
No Gaps
2
Verify the body is securely attached at the
locations marked in the graphic. Make sure
the body is flat against the base. If it is not flat
against the base, press straight down on the body
again until a click is heard.
3
Locate screw indicator sticker on the back of your
vacuum. With Phillips screwdriver fasten body to
base.
Hose
Connector
Collar
4
Attach clear hose from base to body by connecting
the collar and hose connector labeled number 1.
From the rear of the vacuum push collar up and
twist to the right to lock the hose in place.
IMPORTANT: This must be connected for your
vacuum to work.
5
Insert handle into the top of the body until you
hear a click.
HEIGHT ADJUST
THE FOLLOWING HEIGHT SETTINGS ARE RECOMMENDED FOR MAXIMUM
CLEANING PERFORMANCE.
6
1. Low Settings - Two Positions:
Place dirt cup on the base and push towards body
Great for tile, hardwood, linoleum
firmly until you hear a click.
and low pile carpets.
2
3
CORD RELEASE
7
Attach accessory hose, matching same number
labels.
AND STORAGE
Number 2: Attach hose to the handle with a click.
Number 3: Attach hose to the body with a twist.
1
On/Off Pedal
8
Handle Release
Plug power cord into an outlet and press ON/OFF
pedal to turn on. Press handle release and pull
handle back to recline.
IMPORTANT
When pulling on the cord, yellow tape will identify
when the cord is almost fully extended. When red
tape is visible on the cord, the cord has reached its
HEIGHT ADJUST
THE FOLLOWING HEIGHT
SETTINGS ARE RECOMMENDED
FOR MAXIMUM CLEANING
PERFORMANCE.
HEIGHT ADJUST
1
QUICK RELEASE
CLEANING WAND
THE FOLLOWING HEIGHT SETTINGS ARE RECOMMENDED
Low Settings - Two Positions:
1. Press the wand release button.
Great for tile, hardwood, linoleum and low pile
CLEANING PERFORMANCE.
carpets.
1. Low Settings - Two Positions:
Great for tile, hardwood, linoleum
and low pile carpets.
2
High Settings - Two Positions:
3. Push the tools on the wand*
Great for plush and shag carpets.
for convenient cleaning.
When you're done, twist &
CORD RELEASE AND
pull to take them off.
STORAGE*
2. High Settings - Two Positions:
*
Great for plush and shag carpets.
WARNING:
Hold plug when rewinding
onto cord reel. Do not allow plug to whip when
CORD RELEASE
2
rewinding.*
IMPORTANT: When pulling on the cord, yellow
AND STORAGE
tape will identify when the cord is almost fully
extended. When red tape is visible on the cord,
the cord has reached its full length. (Do not pull
*
Accessories not included on all models.
3
the cord past the red tape.)
8
1
*
Prior to using, grasp the end of the plug and pull
to release the cord from the cord reel until red
tape is reached.
IMPORTANT
When pulling on the cord, yellow tape will identify
when the cord is almost fully extended. When red
tape is visible on the cord, the cord has reached its
full length. (Do not pull the cord past the red
tape.)
8
2
To return cord for storage, hold plug and press
down Cord Release Pedal on side of cord reel.
*Not all models have this feature.
WARNING
Hold plug when rewinding onto cord reel. Do not
allow plug to whip when rewinding.
TOOLS
QUICK RELEASE
CLEANING WAND
QUICK RELEASE CLEANING WAND
1. Press the wand release button.
Wand Release
1
Press the wand release button.
3. Push the tools on the wand*
*
for convenient cleaning.
When you're done, twist &
pull to take them off.
*
2
Pull wand up & out and insert hose to wand.
*
Accessories not included on all models.
8
*
*
*
3
Push the tools on the wand* for convenient
cleaning. When you're done, twist & pull to take
them off.
*Accessories not included on all models.
COMPLETE ON-BOARD TOOLKIT
WARNING:
connecting hose, wand or tools.
CAUTION:
Not to be used for grooming
a pet.
OR
When using the 2-IN-1 Combo Tool, Press the
lock button down and slide to switch between
Crevice Tool and Dusting Brush Tool.
*
*
*
2. High Settings - Tw
Great for plush an
*
*
Unplug vacuum before
A
WAR
*
Hold plug when rewindin
allow plug to whip when
*
Not all models hav
A

Publicité

loading

Ce manuel est également adapté pour:

Ud78710