Rechner Sensors EasyTeach KAS Serie Notice D'utilisation page 17

EasyTeach philosophy
Adjustment „empty"
Adjustment „full"
Factory reset*
Test
*If existing
Output version Connection
Antivalent Cable
Antivalent Plug
Normally open or
Cable
Normally closed
Normally open Plug
Normally closed Plug
EasyTeach Charts
The EasyTeach charts are used for optical menu navigation. They illustrate the flashing behaviour of the
LED and the switching of the output at the various menu items.
Classic sensor - antivalent (KAS-...-HP)
Classic sensor - normally open or normally closed
Adjustment ETW:
The EasyTeach menu starts, by activating the EasyTeach connection
(Teach wire / Teach pin with the supply voltage UB+). The menu goes
through the different settings. The desired Menu point is selected when
breaking the connection
Adjustment ETB:
Pushing the EasyTeach-Button activates the EasyTeach menu. The
menu goes through the different settings. The desired menu item is
selected by releasing the EasyTeach-Button
Adjustment ETM:
Holding the EasyTeach magnet on the teachspot activates the Ea-
syTeach menu. The menu goes through the different settings. The de-
sired menu item is selected by removing the magnet
EasyTeach LED green - classic
connection LED yellow - NormLine
Grey wire Output A1
Pin 5 Output A1
White wire Output A1
Pin 4 Output A1
Pin 2 Output A1
Adjustment „empty"
Initialising „empty"
Adjustment „full"
Initialising „full"
Factory reset
Test
LED yellow - classic
LED yellow - NormLine
Output A2
Output A2
Output A1
Output A1
Output A1
Series NormLine (KAS-...-NL)
Not available
Adjustment „empty"
Initialising „empty"
Adjustment „full"
Initialising „full"
Test
17