GBC Shredmaster SC170 Manuel D'utilisation page 5

GBC5134 SC170-SC180 Manual EU
ShredMaster
Specifications
Models
Cutting Style
Throat Width
Shred Width
Sheet Capacity*
Speed
Amperage
Noise Level
Duty Cycle
Volts/ Hz
Safety Lock
Staples/ PaperClips
Credit Cards
* Meassured using standard 80gm/m
Important safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO GBC. IN
THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE IMPORTANT SAFETY
MESSAGES. READ THESE MESSAGES CAREFULLY.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY MESSAGE
IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT. THIS
SYMBOL INDICATES A POTENTIAL PERSONAL SAFETY HAZARD
THAT COULD HURT YOU OR OTHERS, AS WELL AS CAUSE
PRODUCT OR PROPERTY DAMAGE. DO NOT CONNECT HIS UNIT
TO ELECTRICAL POWER OR ATTEMPT TO OPERATE IT BEFORE
YOU HAVE READ THESE OPERATING INSTRUCTIONS. SAVE THESE
INSTRUCTIONS FOR LATER USE.
THIS WARNING IS FOUND ON THE PRODUCT.
Electrical shock hazard.
Do not open. No user
servicable parts inside.
Refer servicing to qualified
service personnel.
This safety message means that you could be seriously hurt or killed if you open
the Product and expose yourself to hazardous voltage.
THIS WARNING IS FOUND ON THE CROSS-CUT VERSION ONLY.
This safety message means that you could be seriously hurt if you place your hands
in the discharge area.
4
29/9/05
® SC170/CC175/SC180/CC185
SC170
Straight-Cut
220mm
6mm
12
2mpm
68dB
2 min on / 30 min off
230-240V / 50Hz
Yes
Yes
Yes
paper.Shredding other than standard paper may damage or shorten the lifetime of the shredder knives.
2
ATTENTION
WARNING
Sharp blades above.
Keep hands away from
discharge chute. Do not
attempt to defeat safety
interlock switch.
11:23 Page 4
CC175 SC180
Cross-Cut Straight Cut
220mm 230mm
4 x 40mm 4mm
8 12
2mpm 2mpm
68dB 68dB
3 min on / 30 min off 3 min on / 30 min off
230-240V / 50Hz 230-240V / 50Hz
Yes Yes
Yes Yes
Yes Yes
Control Panel
Safety Lock
Switch REVERSE/FORWARD/AUTO
Waste Bin
Window. Indicates when basket is full
Easy lift handle (SC170/CC175 only)
Switch ON/OFF
Electrical safeguards
• Unplug your shredder before moving it, emptying the shred bag, or when it is not
in use for an extended period of time.
• Do not operate with a damaged power supply cord or plug, after it malfunctions,
or after it has been damaged in any manner.
• Do not overload electrical outlets beyond capacity as this can result in fire or
electrical shock.
• The socket-outlet should be installed near the equipment and shall be easily
accessible.
• Do not alter the attachment plug. The plug is configured for the appropriate
electrical supply.
• Do not use near water.
• Keep out of reach of children.
• Do NOT use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
WARNING
Do NOT use aerosol dusters or cleaners
Do NOT spray anything into the shredder
Foreign substances can be explosive
CC185
Cross-Cut
230mm
4 x 35mm
10
2mpm
68dB
3 min on / 30 min off
230-240V / 50Hz
Yes
Yes
Yes