Publicité
Les langues disponibles
Les langues disponibles
English
3. When drilling at
hammering"
CAUTION:
If you switch the selector lever during
motor rotation, the tool can start to
rotate abruptly, resulting in unexpected
accidents. Be sure to switch the selector
lever when the motor is at a complete
stop.
(1) Switching to "rotation + hammering"
(a) Pull the selector lever, release lock
and turn it clockwise.
(b) Align
of the selector lever with
on the
illustrated in Fig. 5.
(c) Push in the selector lever to lock it.
NOTE:
Turn the selector lever (do not pull it up) to check if it is completely locked and make
sure that it does not turn.
4. When chipping and shredding at "hammering":
CAUTION:
If the selector lever is switched during motor rotation, the tool can start to
rotate abruptly, resulting in unexpected accidents. Make sure to switch the
selector lever when the motor is at a complete stop.
If the bull point or cold chisel is used at the position of "rotation + hammering",
the tool can start to rotate, resulting in unexpected accidents. Make sure that
they are used at the positon of "hammering".
(1) Switching to "hammering"
(a) Pull the selector lever, release lock
and turn it counterclockwise.
(b) Align
of the selector lever with
on the
illustrated in Fig. 6.
(c) Push in the selector lever to lock it.
NOTE:
Turn the selector lever (do not pull it up)
to check if it is completely locked and
make sure that it does not turn.
12
"rotation +
side of the undercover as
side of the undercover as
Selector Lever
Undercover
Fig. 5
Undercover
Fig. 6
Selector
Lever
Publicité
