Télécharger Imprimer la page

Whirlpool ADN 203/2 CH Manuel D'instructions page 8

Masquer les pouces Voir aussi pour ADN 203/2 CH:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 70
furniture, and that no part of the refrigeration system at the back part of the appliance body
is touching the wall. Pull the appliance away from any furniture or walls. Check that the
cause of increased noise isn't due to bottles, cans in the appliance that might be touching
each other.
Water has appeared at the bottom of the refrigerator compartment. Check whether
a thaw water channel space isn't blocked. Clean the thaw water channel space with a cleaner
intended for that purpose.
Water has appeared under the appliance. The thaw water collection tray has slipped off
the compressor. Place the tray on top of the compressor.
When the appliance door is opened, the rubber sealing gasket pulls out. The gasket
is smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the groove for it
with warm water containing soap or dishwashing detergent and wipe dry. Put the rubber
sealing gasket back into the place.
High temperature in appliance, the compressor operation pauses are short.
Ascertain whether the appliance door/doors are shutting tightly, whether the door wasn't kept
open longer than necessary when taking out or putting in foodstuffs or whether a large
amount of warm food was placed in the appliance.
The top of the appliance has condensation on it. The ambient relative air humidity is
above 65 %. Ventilate the room where the appliance stands and if possible remove the cause
of the humidity.
Remarks on the appliance operating noise. As the appliance operates and goes
through the freezing cycle, various noises will be emitted. This is normal and is not a
sign of any malfunction.
As the refrigerant circulates around the refrigeration system, it causes sounds like murmuring,
bubbling, or rustling. Louder sounds like popping or clicking may be heard for a short time as
the refrigerator compressor switches on.
ENVIRONMENTAL PROTECTION INFORMATION
If the appliance is no longer in use, cut the connecting cable off the used equipment
before its scrapping. Also, remove the appliance lock or render it useless so that the
appliance presents no danger to children while being stored for di- sposal. This
appliance is marked with a symbol of the crossed out waste container in conformance
with the European Directive 2002/96/EC. Such marking informs that the equipment
may not be kept together with other waste coming from the household after the period of its
use. The user is obliged to dispose of the appliance at the waste collection point. The local
waste collection points, shops and communal units form an appropriate system enabling the
disposal of the equipment.
Handling the used electrical and electronic equipment properly contributes to the avoidance of
consequences harmful to the human health and natural environment, resulting from the
presence of hazardous substances and improper storage and processing of such equipment
IF YOUR APPLIANCE IS NOT WORKING PROPERLY, ASCERTAIN WHETHER YOU CAN REMEDY
THE CAUSE OF THE FAULTY FUNCTIONING OF THE APPLIANCE YOURSELF. If you cannot
solve the problem yourself, contact the nearest refrigerator service representative by telephone
or in writing. When making contact necessarily indicate the refrigerator model and number.
You will find this data on the product label, which is glued to the wall of the refrigerator
compartment.
WARRANTY SERVICE
7

Publicité

loading