Dismantling And Cleaning The Impeller - Maytronics Dolphin M400 Manuel D'utilisation

Reassembling the filter elements: Insert the locating tabs at the bottom of the filter element into their
grooves on the base frame then close the "S" clip.
Grooved
end
fitting

6.2 Dismantling and cleaning the impeller

Unplug the power supply before cleaning.
CAUTION
Dismantle the impeller cover and clean around
the impeller housing, then reassemble.
(Use Phillips head screwdriver).
8
Locating tab
Locating tab groove
Octagonal
end
fitting
Reinstall the base frames with filters according to the
diagram.
Do not force the filters into place.
CAUTION
Dolphin M400 / M500
"S" clip
User Instructions
|