Publicité
Les langues disponibles
Les langues disponibles
Note : In case of washing in dishwasher, a slight change might occur in color. This has no
effect on the function of the metal grease filter.
Filters should be cleaned when «C» signal appears on the Display or (due to usage) every 2
or 3 weeks. To delete «C» signal after the filters are cleaned and replaced, press and hold
button more than 3 secs (when device is off). Letter «E» will appear on the display and
it will switch to normal operation. If operation before deleting the «C» signal is required,
active motor speed will appear for 1 sec when you press
button and then the motor will
resume running.
4.3 Charcoal filters replacement
This filter holds odors, it should be replaced after approximately 120 hours of use. It is
available from your dealer or after sales service.
Remplace charcoal filter AF 100
1. Place the carbon filter in its housing.
2. Rotate the carbon filter clockwise and make sure that
it is seated completely.
FIG 6
Remplace charcoal filter AF 500
3. Place the lower part of the carbon filter in the engine housing
4. Press the tab of the charcoal filter and pull it forward,
and ensure that the tabs on the carbon filter are in contact
and locked.
FIG 7
31
Publicité
