Warn PN78468 Instructions D'installation page 2

I. BEFORE YOU BEGIN
 Part edges may be sharp!
Installation tip:
•
Apply electrical tape to clean dry vehicle components that will be in direct contact with aluminum
skid plates. Tape will help protect painted finish against abrasion and can reduce tendency of
squeaks.
•
Raising the vehicle on a hoist or ramps may ease installation of this product.
II. TABLE OF CONTENTS
Before You Begin .............................................page 2
Tools Required.................................................page 2
Torque Specifications ......................................page 2
Parts List..........................................................page 3
Installation .......................................................page 4
Maintenance/Care ...........................................page 5
III. TOOLS REQUIRED
- 8mm end wrench
- #30 Torx socket
IV. TORQUE SPECIFICATIONS
Fastener Size
M6
WARN INDUSTRIES
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Caution
Injury Hazard
Failure to observe these instructions could lead to injury.
Torque lb.ft. (n-m)
8 lb. ft. (10.8 N-m)
PAGE 2 78469A1