Webasto Air Top 3500 Notice De Montage page 61

Air Top 3500 / Air Top 5000
Before using the heater for the first time fit the control unit cover to
prevent the illegal escape of hot air (heater overheating).
The cable passage can be placed at either the left or right side.
To ensure that the cable passage in the control unit cover seals perfectly,
the cable grommet is to be adjusted appropriately on the wiring harness.
11.3. Supply voltage connection
Ideally from the vehicle's central electrical system.
An additional blade terminal fuse holder is to be fitted to protect
the heater (supplied with the heater). The fuse holder may only be
installed in the interior of the vehicle.
Fig. 23: Remove the fastening plate on the fuse holder
F = 15A (24V)
F = 20A (12V)
Fig. 24: Fuse holder, installation position
Electrical connections
57