Publicité
Les langues disponibles
Les langues disponibles
Other functions
After preheating, the oven beeps which ends when cooking starts. During the beep time, the oven maintains the
temperature set.
During cooking, water can be manually injected using the button
light.
It is always possible during cooking to inject water manually to add moisture (if the accessory is installed).
While cooking it is possible to modify all the parameters. Press
displayed and use the buttons
the display until the appearance of rvn and press
Upon completion of cooking, COO end cooking appears followed by cooling with the fans active. At this point
to start new cooking with the same parameters simply press
Upon reaching 80°C, the oven will shut off completely and the message "Fin" will appear.
9.1 GENERAL NOTES
The following product technical specifi cation describes in detail the technical and functional features of the
product.
Permitted use
Controllers for fan electric oven units.
Prohibited use
Any use other than that permitted is PROHIBITED.
9.2 BUTTON FUNCTIONS
1 Selection of functions: temperature / time/ (if any) time between H
2 Increment set (with auto repeat) / start / stop.
3 Recipe Selection / internal light.
4 Decrement set (with auto repeat) / H
y
to modify them. After modifi cation use the button
to return to cooking or scroll down to "Stb" to stop it.
3
4
O manual injection / cycle repetition.
2
20
to introduce moisture and to turn off the
repeatedly until the desired parameter is
g
REPEAT or
1
2
O injections / injections.
2
to scroll through
STOP to stop the oven.
Publicité
