Publicité
Les langues disponibles
Les langues disponibles
6.4 OVEN DOOR REMOVAL AND REPLACEMENT
ATTENTION
Pay attention when removing the appliance door as it is heavy!
It is advisable to remove the oven door and position it delicately on a plane.
1/2/3) Open completely the door and rotate the two stops by about 30°
4)
Grip the door on both sides with both hands, close it partially until it locks with an opening angle of
about 30° (the ends of the 2 stops must interlock in the housing of the door hinge)
4/5)
Lift the door upwards and extract it from the housings of the hinges located on the oven.
To reassemble the door, insert the hinges in the special housings located on the oven, and open it completely.
Reposition the 2 hinge stops in the original position and therefore facing the oven.
4
12
1
2
3
5
Publicité
