Greencut GLM1400C Guide D'entretien page 67

TROUBLESHOOTING
PROBLEM-SOLUTION TABLE
THE TABLE INCLUDES SOME OF THE MOST COMMON PROBLEMS AND THEIR REMEDIES.
PROBLEM
• Check the power and turn on the machine.
Machine
• Check the plug.
it doesn't work
• Replace the blown fuse.
Electrical • Let the machine cool and increase the cutting height before
protection is continuing.
activated
The machine
leaves an uneven • Cutting height is low, increase cutting height.
finish
Cutting blade
• Replace the blade with a new one.
is dull
There is excessive
• The blade bolt is loose, please tighten the bolt.
vibration/noise • The cutting blade is damaged, replace the blade.
SOLUTION
67
EN - GLM1400C