Greencut GLM1400C Guide D'entretien page 62

EN - GLM1400C
OPERATION
MOWING HEIGHT ADJUSTMENTS
The mower has 3 cutting heights: 25mm, 40mm and 55mm. To obtain the desired cutting
height, the front and rear axles of the machine are repositioned at the bottom of the
housing.
Advertencia: Disconnect the mower from the power supply and ensure that the blade has
stopped coasting before adjusting the height.
ADJUSTING THE CUTTING HEIGHT OF THE FRONT WHEELS
1) Turn the mower over.
2) Pull the wheel axle towards the front of the mower.
3) Set the wheel axle to the desired height of cut adjustment position.
Note: Ensure that the front wheels are set to the same height of cut adjustment position.
ADJUSTING THE CUTTING HEIGHT OF THE REAR WHEELS
1) Lay the mower on its side.
2) Pull the rear wheel axle towards the mower's catcher flap.
3) Position the wheel axle in the desired cutting position.
Note: Make sure that both the right and left rear wheel are in the same cutting height
adjustment position.
62