Publicité
Les langues disponibles
Les langues disponibles
Program
Cycle Selection
Information
Rapid
A shorter wash for
lightly soiled loads
that do not need
drying.
Soak
To rinse dishes that
you plan to wash
later that day
GB
Running
time (min)
Auto
150
Intensive
175
Normal
185
ECO
220
Glass
130
90 min
90
Rapid
30
Soak
15
92
Description
Detergent
of Cycle
pre/main
Wash (45°C)
25g
Rinse (50°C)
Rinse (55°C)
Prewash
Energy
Water
Rinse Aid
(Kwh)
(L)
0.9~1.3
11~15
1.6
17.5
1.30
13.5
0.83
10
0.9
13
1.35
12.5
0.75
11
0.02
4
NOTE:
*EN 50242 : This program is the test cycle.
The information for comparability test in accordance with
EN 50242, as follows:
• Capacity: 14 setting
• Position Upper basket: upper wheels on rails
• Rinse aid setting: 6
• PI: 0.49W; Po: 0.45W.
Left-on mode duration: Power will be cut off automatically
after program finished for 30 minutes.
Turning On the Appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and
push them back. It is commended to load the lower basket
first, then the upper one (see the section entitled "Loading the
Dishwasher").
2. Pour in the detergent (see the section entitled "Salt, Detergent
and Rinse Aid").
3. Insert the plug into the socket. The power supply is 220-
240VAC / 50HZ, the specification of the socket is 10A 250VAC.
Make sure that the water supply is turned on to full pressure.
4. Press the program button, the wash program will be changed
as follows direction: ECO->Glass->90min->Rapid->Soak
->Auto->Intensive->Normal;
5. If a program is selected, the response program indicator will
light, then you can also choose the desired function, close the
door, the dishwasher will start working.
GB
93
Publicité
