Publicité
Les langues disponibles
Les langues disponibles
8. Washing phase indicators: Prewash, Mainwash, Rinse,
Drying indicators, Prewash phase have two lights bright,
Mainwash phase have four lights bright, Rinsephase have
six lights bright, Drying phase have eight lights bright,
Eight lights go out after washing finished.
GB
Dishwasher Features
Front View
1. Top spray arm
2. Cutlery rack
3. Upper basket
4. Inner pipe
5. Lower basket
6. Salt container
72
Back View
7. Dispenser
8. Cup shelf
9. Spray arms
10. Filter assembly
11. Inlet pipe connector
12. Drain pipe
4. Prior using for the first time
Before using your dishwasher for the first time:
A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full fill the salt container
with water
C. Fill the rinse aid dispenser
D. Fill in detergent
A. Water Softener
The water softener must be set manually, using the water
hardness dial.
The water softener is designed to remove minerals and salts from
the water, which would have a detrimental or adverse effect on
the operation of the appliance.
The higher the content of these minerals and salts, the harder
your water is.
The softener should be adjusted according to the hardness of the
water in your area. Your local Water Authority can advise you on
the hardness of the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the
amount of salt consumed based on the hardness of the water
used. This is intended to optimise and customise the level of salt
consumption.
Please follow the steps below for adjustment in salt consumption.
GB
73
Publicité
