Publicité
Les langues disponibles
Les langues disponibles
not use batteries from different brands or with
different capacities. Remove the batteries from
the unit if it has not been used for a long time.
ATTENTION!
The manufacturer is not liable for damage
related to improperly installed batteries!
SCOPE OF DELIVERY
Main unit (A), Remote sensor (B), Instruction
manual
Required batteries (not included with purchase):
3x AAA / LR03 (1.5V) for Main Unit
6x AAA / LR03 (1.5V) for Outdoor Sensors
INSTALLATION OF MAIN UNIT
1. Open the battery compartment of the main
unit and insert three new batteries 1,5V
AAA, polarity as illustrated.
2. ALL LCD segments will be displayed for
22
Manual_7000020000000_ClimaTrend-Hygro-Quadro_en-de-fr-es-it_BRESSER_v042024a.indb 22
Manual_7000020000000_ClimaTrend-Hygro-Quadro_en-de-fr-es-it_BRESSER_v042024a.indb 22
about a few seconds.
3. Close the battery compartment.
INSTALLATION OF OUTDOOR SENSOR
1. Open the battery compartment of the
outdoor sensor with a screwdriver.
2. Insert two new batteries 1,5 AAA, the dis-
play shows the temperature and humidity
and the Channel number 1.
3. Press the °C and °F switch (D6) to select
temperature unit.
4. Use the Channel switch (D7) to change
between Channel 1, Channel 2 or Channel
3. There are a total of 3 outdoor sensors,
set all 3 to different channels.
MAIN UNIT
1. The measurements of the installed outdoor
sensors will be transmitted to the main unit
and the radio-controlled reception symbol
12.04.2024 08:47:29
12.04.2024 08:47:29
Publicité
