Intro Play; Random Play - Trevi TT 1062E Mode D'emploi Et Branchement

ENGLISH
SONG TITLE/FOLDER NAME SEARCH FUNCTION (BY REMOTE HANDSET)
YOU CAN SEARCH THE TRACK BY THE TITLE/FLODER NAME IN DISC DURING STOP MODE:-
1. PRESS THE " FIND " BUTTON ONCE, THEN PRESS THE "SKIP UP " (15) (OR SKIP DOWN ) BUTTON (5), YOU CAN SEARCH THE TITLE OF EACH
SONG ONE BY ONE UNDER ALPHABET ORDER ON LCD DISPLAY, THEN PRESS THE CD " PLAY/PAUSE/STOP " BUTTON (4) TO START THE
PLAYBACK OF THE SELECTED TRACK.
2. PRESS AGAIN " FIND " BUTTON, THE FOLDER NAME IS BEING DISPLAYED. THEN PRESS THE "SKIP UP" BUTTON (15) (OR SKIP DOWN)
BUTTON (5) TO SELECT THE DESIRED FOLDER, AND PRESS THE CD" PLAY/PAUSE/STOP " BUTTON (4) TO START THE PLAYBACK OF ALL
TRACKS INSIDE THAT SELECTED FOLDER.
REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, " NOFILE " IS BEING DISPLAYED" ON LCD DISPLAY (13).
- IF THERE IS NO FOLDER BEING READ INSIDE THE MEDIA, IT WILL SHOW " ROOT " ON THE LCD DISPLAY(13).
- THE LCD DISPLAY (13) SUPPORT ENGLISH LANGUAGE ONLY
MP3 TRACK FORMAT REQUIREMENT:-
- MP3 BIT RATE : 32 KBPS~256 KBPS
- THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND THE METHOD OF RECORDING.
FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER THAN NORMAL CD DUE TO DIFFERENCE FORMAT.
REPEAT/INTRO/RANDOM MODE (BY REMOTE HANDSET)
•
PRESS THE REPEAT/INTRO/RANDOM BUTTON BEFORE OR DURING PLAYBACK, A SINGLE TRACK, SINGLE FOLDER (MP3 ONLY) OR ALL THE
TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:-
(1) REPEAT 1 (2) REPEAT ALL TRACK
(6) OFF MODE (5) RANDOM
PLAY MODE
REPEAT SINGLE TRACK
REPEAT ALL TRACKS
REPEAT SINGLE FOLDER
INTRO PLAY MODE
RANDOM MODE
OFF MODE
•REPEAT PLAY
YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.

•INTRO PLAY

YOU CAN LISTEN THE BEGINNING (10 SECONDS) OF EACH TRACK IN A CD BY THIS FUNCTION & SAVING YOUR TIME TO SEARCH THE DESIRE SONG

•RANDOM PLAY

YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
TRACKS PROGRAMMING (BY REMOTE CONTROL)
UP TO 32 TRACKS CAN BE PROGRAMMED FOR MP3 FILE AND PLAY IN ANY ORDER. BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE
BEFORE PROGRAMMING:-
1. SET IN USB/SD MODE & SET AT STOP MODE.
2. PRESS THE "PROGRAM" BUTTON, " PROG " WILL APPEAR ON LCD DISPLAY (13). MOREOVER, IT WILL INDICATE PROGRAM NO. AND DIGITS
FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP (15) OR DOWN BUTTONS (5).
4. PRESS THE " PROGRAM " BUTTON TO STORE THE TRACE INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS CD " PLAY/PAUSE/STOP " BUTTON (4) TO PLAY THE DISC IN ASSIGNED
ORDER.
7. TO CANCEL THE PROGRAMMED FILE, PRESS "STOP" BUTTON ON REMOTE HANDSET UNTIL " PROG " IS DISAPPEAR ON LCD DISPLAY (13).
(3) REPEAT ONE FOLDER
(4) INTRO PLAY
INDICATOR
ON LCD DISPLAY
ALL
INTRO
RANDOM
-----------------
11
TT 1062E TT 1062E