Publicité
Les langues disponibles
Les langues disponibles
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that switch is off and tool's plug is
disconnected from its power supply.
6.1- Maintenance
- Always wear gardening gloves when handling or working near the sharp blades.
- Check your machine regularly before starting any work. Check the machine carefully and replace worn or
damaged parts for safety.
- Keep all nuts, bolts and screws tight to be sure that the machine is in safe working condition.
- Damaged cutter blades have to be repaired or exchanged by a qualified person before working with the
machine.
- Do not attempt to repair the machine yourself, to avoid any danger.
- Only use original accessories and spare parts.
6.2- Cleaning
a) Clean the plastic parts with a soft and clean cloth and dry the housing carefully.
Do not use aggressive cleansing agents (solvents, abrasive cleansers) or an abrasive sponge or any sharp
objects.
- Do not use any caustic chemicals to clean the plastics parts.
- Never put or immerse the product in water or any liquid, and ensure that water does not penetrate the tool.
Never splash with water or clean with high pressure hose!
b) After each cutting operation, clean the cutting blade with a soft brush and cloth with lubricating oil and
spray a thin layer of protective oil on the whole blade.
c) Always keep the ventilation slots in motor housing clean. Clean ventilation holes with soft brush.
6.3- Storage
- Keep product, user manual and accessories in the original packaging.
- Clean tool before storage.
- Always lubricate the cutter blade with protective oil spray before storage.
- Store the machine with the supplied cutter blade protection cover (1).
- It is recommended to store the product in a clean, dry location, protected from humidity, frost and dust, and
keep it out of children's reach (e.g. high or in a locked up place).
- Do not store product in temperatures lower than 0ºC (32ºF)
- Do not place or store any object on top of the product.
6.4- Disposal
- Cutting remnants: do not throw with household rubbish or in the environment. Dispose of cutting remnants
in rubbish collection centres or seek advice from your local municipality.
- Tool: do not dispose with household garbage. Do not throw into the environment.
Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a waste
drop-off centre; or seek advice from your local municipality.
- Proceed with disposal of remnants, the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
Page 21 / 31
Publicité
