Publicité
Les langues disponibles
Les langues disponibles
Do not force the tool. Use the correct tool for the application. The correct
power tool will do the job better and safer when used at the rate for which it was
designed.
Do not use a power tool if the switch does not turn it on or o . Any power tool
that cannot be controlled using the switch is dangerous and must be repaired.
Remove the battery from the power tool or the plug from the power source
before making any adjustments, replacing or repairing parts, cleaning the tool,
leaving the tool idle or unattended, transporting or storing the tool. Such
preventive safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may a ect the power tool's
operation. lf damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
Use the power tool and accessories in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use
of the power tool for operations di erent from those intended could result in a
hazardous situation.
General Electric Gardening Tool Safety Warnings – Service
Have your power tool or charger serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the power tool
or charger is maintained.
SPECIFIC SAFETY RULES
WARNING: Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contain chemicals known to cause
cancer, birth defects, or other reproductive harm. Some samples of these
chemicals are:
lead from lead-based paints
•
crystalline silica from bricks and cement and other masonry products
•
arsenic and chromium from chemically-treated lumber
•
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a
well-ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic
particles.
7
Publicité
