Breitling AVENGER B01 CHRONOGRAPH Mode D'emploi page 10

PREPARATION FOR USE
WINDING – TIME-SETTING
1. Unscrew the water-resistant crown anti-clockwise. Wind the
watch through approximately 40 clockwise turns of the crown.
2. Pull the crown out to position 2, and turn it clockwise to adjust
the calendar to the day prior to the activation date.
3. Pull the crown out to position 3. Turn the hands past midnight
so as to make the calendar jump to the correct date. Then
adjust the hour and minute.
4. Push the crown back to position 1. Press it gently, turning it
gently clockwise, then tighten it again until you feel some
resistance. Do not force!
14
USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3 shows the
measurement in seconds.
2. Stop the measurement by pressing pushpiece A once more.
The measurement is made in hours (totalizer 1), minutes
(totalizer 2), seconds and 1 / of a second (hand 3).
4
3. Reset the chronograph to zero by pressing pushpiece B.
15 15