Publicité
Les langues disponibles
Les langues disponibles
3. OPERATING YOUR APPLIANCE (continued)
FUNCTIONS (continued)
Before reconnecting the power, wait three (3) to five (5) minutes. Otherwise you could damage your
appliance. If you attempt to start the appliance before the end of this time delay, the appliance will
not turn on.
If you turn on the appliance for the first time or after a restart, or after it has been out of operation for
a long time, there may be a temperature difference between the temperature inside the appliance and
what appears on the LED display. This is a normal event caused by the duration of the inactivation
period. Leave the appliance turned on for several hours and the temperatures will stabilize during
operation
REMOVING THE SHELVES
1.
Make sure to open the door completely to avoid damaging the door gasket.
2.
Remove all of the contents loaded on the shelves.
3.
Pull the shelf towards your until it is fully extended outward.
4.
The shelf has plastic posts on both sides as indicated in the diagram below. While facing the unit,
press the plastic post on the right side down while pulling up on the left plastic post. You may
choose to do this by hand or by using a flathead screwdriver.
5.
Evenly pull out the shelf from the track until it is completely removed from the inner
compartment.
STORAGE
This unit can store up to 46 wine bottles. The unit's capacity is based on a regular 750 ml 'Bordeaux'
style bottle (see below for size/dimensions). The unit has five (5) shelves holding eight (8) bottles plus
six (6) bottles on the lowest shelf of the cabinet.
bottles
22
Publicité
