aldes InspirAIR Top Serie Notice D'installation page 25

6.2. Cleaning the heat exchanger
We recommend servicing the heat exchange very two years using the following procedure:
1.
Switch off the power.
4.
Tilt the door forwards and lift it.
6.
Remove the heat exchanger by pulling slowly on
the strap.
Re-insert the heat exchanger plug, then the front door and lastly the filter plug (steps 1 to 5)
2.
Open the filter flap.
4'.
7.
Clean the heat exchanger with a vacuum cleaner
(no water or solvents).
25
3.
Remove the two screws holding the door.
5.
Remove the heat exchanger plug.
8.
Reinsert the heat exchanger by pushing it
carefully horizontally.
EN