Bosch 3 603 A03 0 Notice Originale page 18

18 | English
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. nails, clamps). It is also suit-
able for working on soft wall tiles and for dry sanding and
scraping of small areas. It is ideal for working close to edges
and flush with surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) AutoClic lever for unlocking tools
(2) On/off switch
a)
(3) Rechargeable battery
a)
(4) Battery release button
(5) Orbital stroke rate preselection thumbwheel
(6) Battery charge indicator
(7) Ventilation slots
(8) Thread for auxiliary handle
(9) Tool holder
(10) Worklight
a)
(11) Plunge cut saw blade
a)
(12) Sanding plate
1 609 92A 83N | (05.07.2022)
a)
(13) Sanding sheet
a)
(14) Depth stop
a)
(15) Segment saw blade
(16) Handle (insulated gripping surface)
a)
(17) Extraction hose
a)
(18) Extraction outlet
a)
(19) Dust extraction
(20) Clamping lever for dust extraction system
a)
(21) Dust extraction adapter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless multifunction tool
Article number
Orbital stroke rate preselec-
tion
Constant electronic control
Soft start
AutoClic tool holder
Rated voltage
No-load speed n
0
Oscillation angle on left/
right
Weight according to
A)
EPTA-Procedure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient temper-
ature during operation and
during storage
Recommended re-
chargeable batteries
Recommended battery
chargers
A) Measured at 20−25 °C with rechargeable battery PBA 12V
2.5Ah.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 83 dB(A); sound power level
94 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Working without the Auxiliary Handle
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑4 (sanding),
EN 62841‑2‑11 (sawing):
a)
UniversalMulti 12
3 603 A03 0..
●
●
●
●
V= 12
−1
min 10000–20000
° 1.4
kg 1.1
°C 0 to +35
°C –15 to +50
PBA 12V...
GAL 12...
Bosch Power Tools