Philips PE 1516 Mode D'emploi page 6

I. GENERAL
A. INTRODUCTION
- remote voltage- or current-programming
B. TECHNICAL DATA
1. Input
Voltage ‹ 110 = 125 = 220 = 235 У; 50 to 60 Hz
Maximum current D MSN Ш HE Gu O ZA
Power consumption : maximum 1450 VA
Mains fuses
: VL26, VL27;
10 A delayed action (220 - 235 V)
20 A delayed action (110 - 125 V)
2. Output.
a. As voltage stabilizer
The resolution of the fine adjustment is « 1 mV
slave" system, see point 3e, chapter II. B.
Maximum current : 20 A for any value of the output voltage
Parallel connection : An arbitrary number of instruments may be connected
in parallel.
To obtain parallel connection for "master and slave"
system, see point 3f, chapter II. B.
Whichever is greater applies.
Internal resistance