Kenwood SB050 Serie Mode D'emploi page 4

before using for the first time
Wash the parts: see 'care &
l
cleaning'.
key
a blade assembly
b dispensing lid x 2
c travel mug x 2
d power unit
e speed control
to use your blender
1 Add ice or frozen ingredients to
the mug 1.
This includes frozen fruit, frozen
l
yoghurt, ice cream or ice. These
can be added up to the level
marked 'max frozen ingredients'.
2 Add liquid ingredients to the mug.
This includes fruit (not frozen), fresh
l
yoghurt, milk and fruit juices. These
can be placed into the mug to the
level marked 'max capacity'.
3 Hold the underside of the blade
unit and lower it onto the mug,
blades down – turn clockwise to
lock 1.
4 Shake to disperse the ingredients.
5 To fit the assembled mug to the
power unit, turn the mug upside
down and line up the tabs on the
mug with the grooves in the power
unit and then turn clockwise until a
positive click is heard 2.
6 Select the required speed.
When blending recipes that include
l
frozen ingredients turn the speed
control to '1' for 5 seconds to start
the mixing process, then turn the
speed control to '2'.
Allow the ingredients to blend until
l
smooth.
7 When the desired consistency is
reached, turn the speed control
to the 'off' position. Turn the mug
anticlockwise to release it from the
power unit.
8 Turn the mug the other way up
and unscrew the blade assembly.
9 Fit and lock the lid by turning
clockwise.
When you want to drink, simply
l
flip open the lid cover and clip
into position 3. The drink can be
consumed straight from the mug.
hints & tips
Note that when the mug is filled
l
to max capacity (500ml), this is
approximately two servings.
If you do not intend to consume
l
your drink immediately, keep it
refrigerated.
Ensure your drink is thin enough
l
to be able to drink from the
dispensing lid. To make a thinner
drink add more liquid.
Once your drink has reached
l
the desired consistency, you
can use the pulse 'P' to ensure
all ingredients are thoroughly
blended. Use the pulse 'P' to
operate the power unit in a start
stop action to control the texture
of your drink.
After blending, some drinks may
l
not be completely smooth due
to seeds or the fibrous nature of
ingredients.
Some drinks may separate on
l
standing, therefore it is best
to drink them straight away.
Separated drinks should be stirred
before drinking.
important
Never blend dry ingredients (e.g.
l
spices, nuts) or run the Blender
empty.
Do not use the Blender as a
l
storage container whilst on the
power unit.
Some liquids increase in volume
l
and froth during blending e.g. milk,
so do not overfill and ensure the
blade assembly is correctly fitted.
To ensure long life of your Blender,
l
never run it continuously for longer
than 30 seconds.
Never blend food that has formed
l
a solid mass during freezing, break
it up before adding to the mug.
Never blend more than the max
l
capacities marked on the mug.
When the dispensing lid is fitted
l
always keep the travel mug
upright.
4