GYS NOMAD POWER PRO TRUCK Mode D'emploi page 13

Translation of the original instructions
5
6
1
2
If the above operation still fails to start, check for other problems with the vehicle.
USING AS POWER SUPPLY
For Cell Phone or Tablet Instruction
1. Plug the USB cable to USB 5V output port
2. Select appropriate connector and connect it to your mobile phones or tablet.
3. Press the switch button
For power apply to 12 V vehicle products or 12 V electronics
1. When 12 V electronics/automotive products connected to the cigarette lighter port.
2. Press the switch button
USING AS LED FLASH LIGHT
Press the switch 3 seconds to start the LED flash light
3
There are 4 modes of LED light appear in order (normal. strobe. SOS. off) if you press slightly.
TECHNICAL SPECIFICATIONS
Dimension: 248 x 248 x 96 mm
Weight: 2230 g
Battery Capacity: 5.3 Ah
Output: 5 V 1 A; 5 V  2.1 A; 12 V  10 A
Input: Quick Charge 5V  2A; 9 V  2 A; 12 V  1,5 A
Full charging time: About 10 hours
Starting current: 12 V / 600 A ; 24 V /600 A
Peakcurrent: 12 V / 1500 A ; 24 V / 1500 A
Operating temperature : -20°C ~ 60°C / - 4°F ~ 140°F
NOMAD POWER PRO TRUCK
BOOST
The indication «12V JUMP START READY» or «24V JUMP START READY» does not
appear on the display to indicate that the battery terminal voltage is too low.
Press and hold (> 3 s) the
The indication «12V JUMP START READY» appears on the display (check)
Perform a start within 30 seconds before the NOMAD POWER automatically exits
the forced start mode.
.
10
to charge.
3
to power supply.
3
(12 V) or (24 V) button.
5 6
.
12
EN
13