Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
temperature setting mode. The
LCD flicker, then temperature is adjustable.
Turn the knob to select desired temperature.
Temperature range: 37-120℃
HEAT POWER
Press this button in stand-by mode or
during heating process (except some auto
programs
locked
adjustment),
the
temperature setting mode.
The
signal on LCD flicker, then heat
poweris adjustable. Turn the knob to select
desired heat power.
Heat power range from level 1-10.
For some sticky food, it is suggested to
select low heat power to avoid being burnt
at the bottom.
If food volume is small and it requires
precise temperature, it is suggested to
select low heat power.
Low power will be more precise control;
High power will heat quicker.
It will not work if just select the heat
power but no temperature selected. It is
suggested to follow the default setting when
choosing different temperature levels.

SELF-CLEANING

This program is for cleaning purpose
after use.
Add water from 500ml to 1 liter.
Some detergent will be helpful
Whole process takes around 10
minutes
signal on
the
heat
power
appliance
gets
TURBO
Press and hold this button at standby
mode, the machine starts working at
maximum speed, release and it stop
immediately
When the temperature in the jar is over
60℃, PULSE cannot be used, and the
screen will show E11.
into
There is a speed transfer on the
structure, so it's normal to hear little noise
before the motor start working at the first
pulse.
Maximum operation time for Pulse is 3
min and then rest for 10 minutes
MENU
This button is to choose among the
below 10 auto programs.
CHOP(HACHER)
STEW(MIJOTE2)
STEAM(VAPEUR)
THICK SOUP(VELOUTE)
QUICK SOUP(SOUPE)
STIR(SAUCE)
KNEAD(PETRIR)
RISOTTO (Rice)
SMOOTHIE
YOGURT(YAOURT)

Publicité

Table des Matières
loading

Table des Matières