Assembling the pedestal
Fix securely with assembly screws
Tighten screws firmly.
A
Bracket
Front
Set-up
Fix securely with assembly screws
Tighten screws firmly.
Foam mat or thick
soft cloth
WARNING
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Hook
8
tc̲L3232c̲eng̲0608.indb 8
tc̲L3232c̲eng̲0608.indb 8
Attaching the pedestal to TV
A
. (Total 4 screws)
Base
. (Total 4 screws)
B
Installing the remote's batteries
Open
Note the correct polarity
(+ or -).
Accessories
Assembly screws (4 of each)
A
XSS4+16FJK
size (M4 × 16)
Bracket (1)
B
Caution
Incorrect installation may cause
Close
battery leakage and corrosion,
resulting in damage to the remote
control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or break batteries.
B
XYN4+F12FJK
size (M4 × 12)
Base (1)
2010/12/24 13:40:06
2010/12/24 13:40:06