ATEX/IECEx
DANGER!
Quantometers QA are suitable for use in Zone 1 hazardous
areas and are approved with the following certification
(IECEx) and manufacturer's declaration (ATEX):
II 2G Ex h IIC T4 Gb
IECEx TUR 16.0043x (IECEx)
8000310657
CAUTION!
Quantometers QAe are not approved for use in hazardous areas.
* The marking on the device shall be applicable.
1.3 Copyright and data protection
This document has been created with the greatest possible care. No liability
is assumed for the accuracy, completeness or currency of the contents.
The contents and works produced in this document are subject to copyright.
Contributions by third parties are identified as such. The reproduction,
processing, distribution and any form of use beyond that which is permitted
by copyright require the written authorization of the respective author or the
manufacturer. The manufacturer strives to always respect the copyright of
others or to use his own or licence-free works.
We would like to point out that data transfer via the Internet (e.g. through e-
mail communication) can be subject to breaches in security. It is not
possible to provide complete protection against access by third parties.
1.4 Exemption from liability
The manufacturer shall not be liable for damage of any type caused by the
use of this product, including but not restricted to, direct, indirect or
incidental damage and its consequences.
This exemption from liability does not apply if the manufacturer has acted
intentionally or with gross negligence. In the event that any applicable law
73025026a
© Elster GmbH | All rights reserved. Subject to modification
TÜV Rheinland Industrieservice GmbH
Am Grauen Stein | 51105 Köln | Germany
TÜV Nord AG
(ATEX)
Am TÜV 1 | 30519 Hannover | Germany
Honeywell
11