Annovi Reverberi RTP Serie Notice D'utilisation Et Installation page 25

After-Sales service procedures
To request after-sales service (in the event of a pump
malfunction or failure, etc.) contact your nearest service
centre or the manufacturer.
Disclaimer
The manufacturer accepts no liability arising from:
- incorrect installation;
- improper use of the pump;
- failure to service the pump;
- unauthorised modifications and/or repairs;
- use of non-original spare parts, or parts not specifically intended for the model.
Annexed documentation
The following documentation is issued to the Customer together with this manual:
- Declaration of incorporation of the pump in accordance with directive 2006/42/EC.
Glossary
Purchaser: individual, organisation or company which
has purchased the pump and intends to use it for the in-
tended purposes.
Routine maintenance: all operations required to keep
the pump in good working order, to ensure a longer
working life and maintain compliance with safety re-
quirements. The manufacturer describes the mainte-
nance procedures and intervals in this "Use and Installa-
tion Manual".
Repairs: all operations performed to conserve the
pump's efficiency and operating characteristics. These
procedures, required in the event of an unexpected mal-
function, must only be carried out by a skilled technician.
The information for the use of skilled repair technicians
only is provided in the "Repairs Manual".
Operator: authorised person having the prerequisites,
skills and information needed for use of the pump or the
machine or plant on which the pump is installed, and for
routine maintenance procedures.
General description
The pump is designed and constructed to pump and
compress liquids at high pressure in industrial applica-
tions.
The pumping action is provided by a series of pistons
connected to the drive shaft by connecting-rods.
English language
GENERAL INFORMATION
When requesting after-sales services, always state the
pump's data plate data and the type of problem.
Installer: authorised technician having the prerequisites
and the specific skills required for the tasks involved in
the installation of the pump and/or similar machinery
and for the performance of the routine maintenance op-
erations in conditions of safety, independently and with-
out risk.
Training: a phase necessary to transfer to the operators
the knowledge needed for the correct, risk-free perfor-
mance of operations.
When in operation, the pistons perform an axial stroke
inside the head, where the intake and delivery ducts are
fitted with valves which allow the liquid to pass in one
direction only.
25
1
Use and Installation