Ryobi RSH-2455 Manuel D'utilisation page 15

Broyeur électrique silencieux
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
RSH-2455 _25 lgs..qxd
GB
F
D
E
I
P
SPECIFIC SAFETY RULES
Never leave the machine unsupervised. First switch
off the motor and disconnect from the mains.
ELECTRICAL SAFETY RULES
Make sure the cord is located so that it will not be
stepped on, tripped over or otherwise subjected to
damage or stress.
Do not abuse the power cord. Never carry the product
by the cord. Never pull the plug out of the power point
by the cord. Keep the cord away from heat, oil and
sharp edges.
For outdoors work use only suitably approved
extension cables with a min. conductor cross section
of 1.5 mm
2
. The plug connectors must have earthing
contacts and be rain-waterproof.
Inspect extension cords for deterioration, cuts or
cracks in the insulation. Repair or replace the cords if
any defects appear.
A nameplate on the product indicates the unit's
voltage. Never connect the product to an AC voltage
that differs form this voltage.
If the power cord or extension cable becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
Electrical power should be supplied via a Residual
Current Device (RCD) with a tripping current of not
more than 30 mA.
MAINTENANCE RULES
Maintain the product with care. Follow instructions for
changing accessories. Keep the product dry,
clean and free from oil and grease.
Unplug the product before making adjustments
or repairs.
Do not use the product if parts have been damaged.
Check the product regularly to make sure that it will
operate properly and perform the intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts and any other
condition that may affect the unit operation. Inspect
the unit's power connection. Any part that is damaged
should be properly repaired or replaced by a Ryobi
authorized service centre.
Never douse or squirt the product with water or any
other liquid. Do not use detergents or solvents.
Keep handles dry, clean and free from debris. After
each use, clean with a soft, dry cloth.
9/19/03
3:06 PM
Page 9
NL
S
DK
N
FIN GR HU
CZ RU
English
SERVICE RULES
STORAGE AND TRANSPORTATION RULES
9
RO PL SLO HR TR EST LT
WARNING
Before carrying out any maintenance operations,
cut off electric power supply by disconnecting the
plug from the mains.
Service on this product must be performed by qualified
repair personnel only. Service or maintenance
performed by unqualified personnel could result in
injury to the user or damage to the product. Such
service may also woid your warranty.
Use only identical replacement parts when servicing
the product. Follow the instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow maintenance instructions may create a
risk of shock, serious injury to the user or damage to
the product. Such use may also void your warranty.
Store the product inside a dry place.
Lock it up to prevent unauthorized use or damage.
Keep the product out of the reach of children.
Secure the product when transporting it.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this product.
If you loan someone this product, loan these
instructions also.
LV
SK BG

Publicité

Table des Matières
loading

Table des Matières