Télécharger Imprimer la page

Jonsered CS 2255S Manuel D'utilisation page 42

Publicité

Les langues disponibles

Les langues disponibles

Recommended cutting equipment for Canada
Following is a list of recommended cutting equipment for the Jonsered chain saw models CS 2255 and CS 2255S. The
listed combination(s) of powerhead, bar and saw chain meet all requirements outlined in Canadian Standards
Assosiation Z62.1-11 (Chain Saws) and Z62.3-11 (Chain Saw Kickback).
Furthermore the saw chain Jonsered H80 is evaluated and listed as a Type C Low Kickback Saw Chain according to the
provisions in Z62.3-04.
Kickback information
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
Length, inch
Pitch, inch
13
15
16
0.325
18
20
15
16
3/8
18
20
18
3/8
20
Note: For the saw chains above (if available) you are free to choose between 0.050" or 0.058" gauge drive links for the
corresponding bar, see the table below
0.050"/1,3 mm
0.058"/1,5 mm
H25
Saw chain filing and file gauges
42 – English
All manuals and user guides at all-guides.com
TECHNICAL DATA
Guide bar
Gauge, inch
Max. nose radius
10T
0,058
12T
0,058
11T
0.050
11T
H46
H80
H42
Saw chain
Type
Drive link count
56
64
Jonsered H25
66
72
78/80
56
60
Jonsered H42
68
72
68
Jonsered H80
72
1155548-32 Rev.1 2013-06-28

Publicité

loading

Ce manuel est également adapté pour:

Cs 2255