How to Brew Now
7. Rotate Shower Head to position
above ground coffee.
w CAUTION
Burn Hazard.
Position shower head over brew
basket before use.
NOTES:
• Do not move Shower Head until end of brew cycle, after Brew Lights
under Water Reservoir have turned off.
• If not using a charcoal water filter, use filtered or bottled water for
better-tasting coffee.
• Move Drip Stop to closed position ( ) at end of cycle, after Brew Lights
under Water Reservoir have turned off. This prevent drips when Carafe
is removed.
8
(cont.)
8. Display will show amount of
water to be added such as:
"
." Add displayed amount
of water to Water Reservoir.
Place Lid on Water Reservoir.
NOTE: All water poured into
Water Reservoir will be brewed
into Carafe. Water Reservoir
does not retain any water.
• Pressing brew now button during brewing cancels brew cycle once
Coffee Maker has started brewing. If brew process is stopped early,
you must complete brew process to empty water in reservoir. To finish
brewing, place Carafe on Keep Warm Plate and press brew now button.
• You can use same settings as your previous brew as long as power
has not been interrupted; press scale button. Weigh the grounds based
on "Manual Pour-Over Coffee to Water Ratios" on page 11. Then press
back button and move Shower Head into position above grounds. Add
desired cups of water into Water Reservoir and press brew now button.
9. Press brew now button. Brew
Lights will turn on. Then lights will
turn off automatically when brew
cycle is complete. Keep Warm
Indicator Light will illuminate red.
This function will automatically
turn off after 2 hours, or can be
turned off anytime by pressing
keep warm button.