Publicité
Les langues disponibles
Les langues disponibles
Getting Started
Setting Clock
1. Plug into outlet.
Installing Water Filter (optional)
1. Before first use, soak Water
Filter Pod in cold tap water for
15 minutes. Then rinse under
cold running tap water for
15 seconds.
6
2. Press and hold Select Button to rapidly scroll though hours and
minutes. Once correct hour or minute is displayed, setting will flash
for 4 seconds and be confirmed.
Before first use: Wash Carafe and Lid, Drip Cup, Brew Basket, Reusable
Filter, and Water Reservoir Lid in hot, soapy water. Rinse and dry. Run 2
cycles of tap water through Coffee Maker and discard water.
2. Add Water Filter Pod to Water
Filter Base. Snap Water Filter
Lid onto base. Set your
replacement date by aligning
arrow, on Water Filter Base,
with month, on Water Filter
Lid, when you expect to have
brewed 60 cycles. NOTE:
Replace Water Filter Pod after 60
brew cycles. Filters are available
from hamiltonbeach.com.
3. Display Panel will show time
that has been set. If time has
not been set, "0:00" will flash.
3. Insert Water Filter into water
filter hole located at bottom of
Water Reservoir. Gently push
down to secure in place.
Publicité
